If you want to pass the CCNP exam with less time and energy, our 100% real CCNP 300-510 SPRI practice tests are the best preparation materials for you. our 300-510 SPRI exam practice tests help you 100% pass the exam! Now, this post contains 10 CCNP 300-510 SPRI questions with verified answers. Try the demo below to assess yourself!

QUESTION 1

A network consultant is troubleshooting IS-IS instances to identify why routing domains have communication problems between the two instances. Which description of the possible cause of issues in the routing domain is accurate?

A.The same interface cannot be advertised in two different IS-IS instances

B.The IS-IS “ISP” and “ISP2” instances are unrelated and unable to intercommunicate

C.The configured IS-IS NSEL value is not allowing the routing systems to establish a neighborship

D.The interface mode IP router is-is command was not included in the script

Correct Answer: A

QUESTION 2

What is used by SR-TE to steer traffic through the network?

A.the shortest path calculated by IGP

B.dynamic rules

C.path policy

D.explicit maps

Correct Answer: C

QUESTION 3

For which reason can two devices fail to establish an OSPF neighbor relationship?

A. The two devices have different process IDs
B. The two devices have different network types
C. The two devices have different router IDs
D. The two devices have the same area ID

 Correct Answer: B

QUESTION 4

Which statement about enabling segment routing for IGPs is true?

A. Segment routing must first be enabled under the routing process and then globally
B. Segment routing must first be enabled globally and then under the routing process
C. Segment Routing can be enabled only under the routing process
D. Segment Routing can be enabled only globally

 Correct Answer: B

QUESTION 5

Which task is performed when troubleshooting LDP?

A. Execute the ping utility to generate information about the MAC addresses used along the path
B. Verify that MPLS is disabled globally and enabled on the necessary interfaces on a per-interface basis
C. Execute the traceroute utility to generate information about the labels used along the path
D. Verify that Cisco Express Forwarding has been disabled on the network

 Correct Answer: C

300-510-Dumps

QUESTION 6

What can be used to determine a path from the head-end to a tail-end router when implementing SR-TE with a head-end, with little information on the network topology?

A. traffic controller
B. path computation engine
C. tail-end router
D. SNMP server

Correct Answer: B 

QUESTION 7

Which two conditions must be met before separate ISPs can provide interdomain multicast routing? (Choose two.)

A. Each ISP must configure MSDP to connect its multicast administrative domain to the domains at other ISPs.
B. Each ISP must dedicate a single router to handle multicast traffic between providers.
C. Each ISP must replace its RP assignment with a global RP.
D. Each ISP must configure its network to use PIM-DM.
E. Each ISP must support intradomain multicast routing.

 Correct Answer: AE

QUESTION 8

An engineer is troubleshooting a connectivity issue across the MPLS network and verifying packets’ forwarding behavior. Which table does the engineer look at to verify the forwarding behavior of an IP packet as it enters the MPLS network at the ingress LSR?

A. LFIB
B. LIB
C. RIB
D. FIB

 Correct Answer: D

QUESTION 9

You have configured MSDP peering between two autonomous systems that pass traffic between two sites, but the peering has failed to come up. Which task do you perform to begin troubleshooting the problem?

A. Verify that multicast has been disabled globally
B. Verify that PIM-DM is configured on the source interface
C. Verify that both source interfaces are reachable from both peers
D. Verify that the two MSDP peers allow asymmetric routing

 Correct Answer: C

QUESTION 10

For which reason do you deploy BGP confederations within a BGP transit backbone?

A. to support a larger number of eBGP peer sessions
B. to increase the number of routes that can be redistributed between the running IGP and BGP
C. to reduce the number of eBGP routes that must be shared between autonomous systems
D. to reduce the number of iBGP peering sessions

 Correct Answer: D

Why our?

our is a brilliant IT training institute for 8 years. our 100% real CCNP 300-510 SPRI practice tests contain Real Questions and Answers. To ace the 300-510 SPRI exam, all you have to do is purchase our CCNP 300-510 practice test and practice it for 3-5 days!

◆ The valid real test dumps Based on the 300-510 SPRI Real Test.

 ◆ Well Prepared by Our Professional Experts

 ◆ 100% real exam environment

 ◆ 100% accurate & valid exam answers and questions

 ◆ 7/24 Online Technical Support & VIP customer service

 ◆ Service Extension in case of failure

The process of becoming a networker isn’t considered for the faint-hearted. It requires lots of hard work and nice and trustworthy 300-510 Dumps, like that offered at the ExamClubs, to clear this grueling exam.

Comments

Leave a comment